LHD23M Rock Drill
This lightweight tool is designed for drilling blast, anchor and rock-splitting holes. Used by contractors, utilities and military who need convenient and efficient drilling without large compressors. With standard integral steel, it drills diameters of up to 2 inches and depths of approximately 20 feet by using hydraulic power for impact and rotation. A small additional compressor is needed for flushing. Without air-flushing, it can be operated wholly by hydraulics and can drill holes up to 3.3 feet deep with a spiral hammer drill.
| Type | Part No. | Drill shank Hex-in | Weight without hoses & drill lb. (kg) | Service weight lb. (kg) | Oil flow gpm (l/min.) | Working pressure psi (bar) | Return line pressure maximum psi (bar) | Impact rate bpm | Revolutions rpm | Torque ft. lb. (Nm) | Direction of rotation |
| LHD23M | 1801380001 | 7/8x4-1/4 | 54 | 62.4 (28.3) | 5.3-6.6 (20-25) | 1450-2000 (100-140) | 215 (15) | 2400-3000 | 320-400 | 47.94 (65) | CW5) |
This product was added to our catalog on Tuesday 21 April, 2009.
