Sump pump
Chicago Pneumatic's CP0010 and CP0020 sump pumps are designed for hight performance and durability which makes them ideal for removing water from trenches, ditches, manholes, industrial sumps and excavations. Both models will pump down to within only 7/8" from base.
| Model | CP0010 |
| Part# | T022224 |
| Min. water depth (in) | 7/8" |
| Overall height (in) | 17-1/2" |
| Height w/o valve (in) | 13-3/4" |
| Water discharge (NPTin) | 2" |
| New weight (lb) | 33# |
| Min. opening pump will enter (in) | 8-1/4 x 9" |
| Air inlet thread size (NPT-in) | 3/4" |
| Recommended hose size (in) | 3/4" |
| Motor (hp) | 3 |
All Models
- Single-stage centrifugal units driven by powerful vane motors
- Double seals protect bearings and motor from water and mud
- Integral oiler provides continuous lubrication
- Integral strainer, air inlet valve
- Bronze impeller
- Cast-iron housing
- Air inlet valve
CP0010 Performance-Air consumption at 90psi: 100cfm
| Total Head | Discharge rate | | | | | |
| (ft) | 40psi (gal/min) | 60psi(gal/min) | 80psi(gal/min) | 90psi(gal/min) | 100psi(gal/min) | |
| 10' | 160 | 220 | 240 | 245 | 255 | |
| 20' | 140 | 205 | 230 | 240 | 250 | |
| 30' | 120 | 185 | 215 | 230 | 245 | |
| 40' | 90 | 160 | 200 | 215 | 230 | |
| 50' | 60 | 135 | 175 | 195 | 210 | |
| 60' | 10 | 105 | 155 | 175 | 195 | |
| 70' | - | 80 | 130 | 150 | 170 | |
| 24.3' | - | 60 | 95 | 125 | 155 | |
| 90' | - | - | 75 | 105 | 125 | |
| 100' | - | - | 55 | 75 | 95 | |
| | | | | | |
This product was added to our catalog on Wednesday 01 April, 2009.
