Failing L100C Mud Pump

DLT #:  MP78663

  
     The Failing Model L100C is a duplex reciprocating type power slush pump designed especially for use on lightweight shot hole and core drills.
  
    The power end is a lightweight, fabricated steel unit with integral jackshaft and eccentric bearing supports.  A removable cover is supplied for easy accessibility to the power end mechanism.  The eccentrics and main sprockets are cast in one piece permitting the use of a straight steel eccentric shaft.  The connecting rods feature renewable, brone eccentric bushings, and the crosshead is solid type and reinforced around the load areas.  Jackshaft and eccentric shaft are mounted on ball and roller bearings respectively and drive is handled through a triple roller chain.
   

• The fluid end is a one-piece casting valve pot type with a bolted cover plate over each valve.  Suction and discharge openings are screw type.
• All bearings and chain are flood lubricated from an oil reservoir in the power end.  
• Failing lubricator packing glands provide lubrication to the piston rods.
• The Model L100C pump is equipped with Failing Mudmaster pistons, hardened liners, rods and valves.
  

Failing L100C Mud Pump Specifications
Size, Ins.
Dia. of Fluid Cylinder	4-1/2	4	3-1/2
Length of Stroke	5
Max. Pressure (Lbs. per Sq. In.)	275	350	450
Displacement
Displacement US Gals. per Min. (Rods Deducted)	63.8 - 120	50.6 - 94.4	40.2 - 72.3
Approx. Barrels per Hr.  (42 US Gal.)	94.9 - 171	74.9 - 135
Brake N.P. at Max. Pressure	12.5 - 22.5
R.P.M.
Crankshaft	50 - 90
Jackshaft	240 - 450
Max. Plunger Load (Lbs.)	4380
Pipe Size
Suction	3
Discharge	2
Approx. Wt. of Pump (Lbs.)	1015
Approx. O.A. Dim. Ins.
Height	18-1/4
Width of Mud End	24-1/4
Length	60
Model L100C - 450 lbs. Working Pressure - 800 lbs. Test Pressure