Ingersoll Rand ECM350 Air track Drill w/VL140 Drifter

DLT #: AT1201
Serial Number:  H280018

1. Dissassemble Hammer and Check and Replace all parts not within specification
2. Test Hammer
3. Replace Oil in Hammer
4. Check Tram Motors for Operation and Leaks - repair as needed
5. Check Final Drives for Operation and Leaks - repair as needed
6. Replace Oil in Final Drives
7. Check Brakes for Operation - repair as needed
8. Check Track Chains - replace as needed
9. Check Bottom and Top Rollers - repair or replace as needed
10. Check Track Sprockets - replace as needed
11. Check Front Idler and Bearings - repair or replace as needed
    
12. Check Track Adjuster for Operation - repair as needed
13. Check Feed Motor and Transmission for Operation and Leaks - repair as needed
14. Change Oil in Feed Transmission
15. Check Feed Chain for Wear - replace as needed
16. Check Feed Sprockets and Bearings for Wear - replace as needed
17. Change Hydraulic Oil and Filter
18. Check Hydraulic System for Operation and Leaks - repair as needed
19. Check Hydraulic Hoses for Wear - replace as needed
20. Check Hydraulic Cylinders for Operation and Leaks - rebuild as required
21. Check Air Control Valve for Operation - repair as needed
22. Check all Air Hoses for Wear - replace as needed
23. Check Pins and Bushings - replace as needed
24. Grease Complete Machine
25. Test Drill with Machine
    

      This agile, powerful drill climbs steep grades over roughest ground, and takes the punishment. You've seen thousands of them on construction jobs of all kinds around the world.

      It's a fine quarry drill, too. With an Ingersoll-Rand portable air compressor, you've got a high-performance team that gets more work done faster, more efficiently, and keeps doing it longer than anything else in its class.

      The basic ECM-350 design has seen many improvements in its years of service - but every drill produced has set the world standard for reliability and performance in its time.

Traction, brakes ideal for rough ground.
      Each track is powered independently by an 11.4-hp piston air motor and an enclosed gear drive. The spring-applied, hydraulically-released disc brakes are equally effective in forward or reverse.
      Controlled hydraulic flow cushions track oscillation to minimize shock loads. Oscillation may be locked out to permit a solid setup for drilling.

Extendable boom reaches more holes.
      The 1.5-, (5') boom extension reaches out over banks, and multiplies the number of holes you can drill before moving. You can drill a line of holes simply by extending the boom.
      The 1.2-m (4') hydraulic guide extension also reduces setup time; adjust it for drilling on steep slopes or over ledges.
All hydraulic positioning cylinders have lock-check valves.

Trap-door centralizer.
      Simple, rugged design flips open at the touch of a foot. Locks shut with a quick-release pin. No latches, no springs.

Powerful feed motor.
      A piston-type air feed motor drives a heavy roller chain, providing 1362 kg (3000 lb.) of pullout power, and all the pulldown you'll ever need.

Convenient controls.
      Tramming controls are mounted on a swivel plate which can be pin-locked in any of the three positions. A safety-lockout tow hitch prevents using the rear position when a compressor is being towed.
      Controls for all drilling functions are mounted on a the drill tower. A fine-feed regulator helps the operator collar the hole and prevent stuck steels.

VL-140 Drifter Specs
Hole Diameter	64 - 102 mm (2-1/2 - 4")
Bore	140 mm (5.5")
Stroke	92 mm (3.62")
Weight	195 kg (430 lb.)
Blows/min.	2100
Air Required	21.2 m3/min. (750 cfm)