Sullair Mark II

DLT# AT9605

Sullair Mark II Air Track Drill, No Hammer

Sullair Mark II Specifications and Dimensions
Net Weight	13800 lbs (6260kg)
Minimum Height	4'8" (1420 mm)
Width	8' (2440 mm)
Length w/o Feed	16'3" (4955 mm)
Feed Vertical	16'8" (5080 mm)
Feed Horizontal	22'5" (6835 mm)
Ground Clearance	12" (305 mm)
Tow Hitch Height	1'8" (510 mm)
Boom
Extension	5' (1525 mm)
Swing Left	37°
Swing Right	40°
Elevation Up	39°
Elevation Down	10°
Highest Horiz. Hole	16' (4675 mm)
Lowest Horiz. Hole	3' (915 mm)
Max. Reach Left	11'8" (3555 mm)
Max. Reach Right	13'8.5" (4180 mm)
Feed
Dump	160°
Swing Left	40°
Swing Right	40°
Extension	4' (1220 mm)
Motor Power	5.6 hp (4.18 kW)
Chain Pull	3500 lbs (1590 kg)
Chain Speed	104 ft/min (31.7 m/min)
Chain Pitch	1.25" (31.75 mm)
Drill Rod Change	12' (3660 mm)
Drill Travel	14'6" (4420 mm)
Tracks
Width of Pads	10" (255 mm)
Ground Contact Length	7' (2135 mm)
Area	1680 sq. in. (10840 sq. cm.)
No. of Bottom Rollers	7
No. of Top Rollers	1
Front Idler Adjustment	Hydraulic (grease gun)
Tram Motor Power	15 hp (11.2 kW)
Tractive Effort	13212 lbs. (5990 kg)
Tram Speed	158 ft/min (48 m/min)
Transmission	Planetary
Clutch	Splined Sleeve
Final Drive	Spur gear, enclosed
Brake	Band, auto spring set, air release