Sullair Mark II w/VCR 360/361 and TEI Clamp and GD HEK

Sullair Mark II w/VCR 360/361 and TEI Clamp and GD HEK Remote Hoist

Sullair Mark II Air Track Drill

Check out the bottom of the page to view more pictures!

Sullair Mark II Specifications and Dimensions
Net Weight	13800 lbs  (6260kg)
Minimum Height	4'8"  (1420 mm)
Width	8'  (2440 mm)
Length w/o Feed	16'3"  (4955 mm)
Feed Vertical	16'8"  (5080 mm)
Feed Horizontal	22'5"  (6835 mm)
Ground Clearance	12"  (305 mm)
Tow Hitch Height	1'8"  (510 mm)
Boom
Extension	5'  (1525 mm(
Swing Left	37°
Swing Right	40°
Elevation Up	39°
Elevation Down	10°
Highest Horiz. Hole	16'  (4675 mm)
Lowest Horiz. Hole	3'  (915 mm)
Max. Reach Left	11'8"  (3555 mm)
Max. Reach Right	13'8.5"  (4180 mm)
Feed
Dump	160°
Swing Left	40°
Swing Right	40°
Extension	4'  (1220 mm)
Motor Power	5.6 hp  (4.18 kW)
Chain Pull	3500 lbs  (1590 kg)
Chain Speed	104 ft/min  (31.7 m/min)
Chain Pitch	1.25"  (31.75 mm)
Drill Rod Change	12'  (3660 mm)
Drill Travel	14'6"  (4420 mm)
Tracks
Width of Pads	10"  (255 mm)
Ground Contact Length	7'  (2135 mm)
Area	1680 sq. in.  (10840 sq. cm.)
No. of Bottom Rollers	7
No. of Top Rollers	1
Front Idler Adjustment	Hydraulic (grease gun)
Tram Motor Power	15 hp  (11.2 kW)
Tractive Effort	13212 lbs.  (5990 kg)
Tram Speed	158 ft/min   (48 m/min)
Transmission	Planetary
Clutch	Splined Sleeve
Final Drive	Spur gear, enclosed
Brake	Band, auto spring set, air released

VCR360 Hammer

    Choose the VCR-360 or VCR-361 continuous rotation drill - unique drill hammers that operate effectively to produce more hole than comparable independent rotation drills. Either one of these SULLIVAN hammers will put down blast holes in the hardest rock with high production and optimum reliability.

Specifications for VCR-360 and VCR-361
Drill Engines (Metrics in parentheses)	VCR-360	VCR-361
Bore Diameter	5-1/4" (134 mm)	6-1/2" (165 mm)
Stroke	3-5/8" (92 mm)	3-3/4" (95 mm)
Drill Steel	1-1/2" (38 mm)	1-3/4" (44 mm)
Striking Bar	Threaded for optional steel systems
Rotation Type	Independent
Air Tube OD/ID	5/8" / 1/2"	3/4" / 5/8"
Air Hose (ID), Drill	2" (51 mm)	2" (51 mm)
Air Hose (ID), Blow	1" (25 mm)	1" (25 mm)
Air Hose (ID), Rotation	1" (25 mm)	1" (25 mm)
Hole Size Range	2-1/2" - 4" (64-102 mm)	3" - 4" (76-102 mm)
Air Volume, Drill & Blow	600 cfm (16.8 m3/min.)	850 cfm (24.1 m3/min.)
Air Volume, Drill Only	325 cfm (9.1 m3/min.)	485 cfm (13.7 m3/min.)
Air Pressure	100 psi (7 kg/cm2)	100 psi (7 kg/cm2)
Blows/Min.	2250 bpm	2050 bpm
Net Weight	496 lbs. (225 kg)	496 lbs. (225 kg)

Improved Production Efficiency with Reduced Energy Consumption
    The new VCR-361 drill represents the newest and most advanced drill in popular VCR series of high performance Sullivan drill engines. Based on the same design concepts that have made the VCR-261 drills the leasers in their class for penetration, strength and reliable service, the VCR-361 drill incorporates innovations that make it one of the most energy efficient drills available. That is, it gives you the same high performance of the VCR-261 drills while using less air and fuel...something that's certainly right for these energy costly times.

More Performance On Less Air
    With the new VCR-361 drill you need only 850 cfm of air to drill at the same penetration rate as the VCR-261 drill (which requires 1000 cfm). The savings are obvious the initial cost economy of a smaller air compressor is considerable, plus the fuel consumption of the smaller compressor is significantly less. Or, if a dry dust collector is desired (or required), the VCR-361 drill will operate at peak efficiency with dust collection off the same compressor that powered the VCR-261 drill alone.

Lubrication System Extends Drill Life
    The new VCR-361 incorporates a sealed lubrication system which extends drill engine life. The entire rotation drive assembly is lubricated by its own system, sealed from the percussion assembly and the outside environment. Blow air is provided separately to the drill string.

Exclusive Sullivan Valveless, Continuous Rotation Design
    Like previous Sullivan drill engines, the new VCR-361 has only one moving part in the hammer - the piston. This valveless design has proven itself with penetration rates that are consistently faster than conventional designs. Rotation is independently powered by an efficient gear-type air motor. Rate of rotation is infinitely variable to suit drilling conditions.

Quieter Muffler
    A resiliently mounted heavy-walled alumninum muffler substantially reduces noise. Spent air (and noise) is directed up and away from the operator further increasing operator comfort.

VCR-361 Drill Operation The two basic operation functions of the VCR-361 drill - percussion and rotation - are accomplished independent of each other.
Percussion	Rotation
Air entering the drill passes directly to both ends of the piston. The piston reciprocates in the cylinder in a valveless cycle in which the piston itself operates as a valve, alternately exposing and covering ports on the ends of the cylinder. This is a volume expansion controlled cycle using only one moving part - the piston.	A separate air inlet admits air to a gear-type air motor. The air motor transmits torque through the rotation gearing to the chuck driver which is splined to receive the striking bar. Rotation (rpm) of the drill steel is continuously variable by use of the rotation valve on the drill feed.

VCR-361 Drill Specifications
Bore Diameter	6-1/2" (166 mm)
Stroke	3-3/4" (95 mm)
Striking Bar	Threaded for optional steel
Drill Steel	1-3/4" O.D.
Rotation Type	Independent
Hose Size	2" Drill, 1" Blow
Hole Size Range	3" to 4" bit dia. (76 - 102 mm)
Air Pressure	100 psi (7 kg/cm2)
Air Requirements	850 cm (24 m3/min) Drill & Blow (up to 2500 ft. aboce mean sea level)
Drill Weight	496 lbs. (225 kg)

HEK Remote

Specifications for HEK Single Drum Air Hoist
Rope Speed (ft. per min.)
1000 lbs. Pull	123
1250 lbs. Pull	113
1500 lbs. Pull	103
2000 lbs. Pull	83
2500 lbs. Pull	58
Maximum Rope Capacity
5/16" Cable	401
3/8" Cable	278
1/2" Cable	157
Working Rope Capacity
5/16" Cable	313
3/8" Cable	217
1/2" Cable	122
Rated Capacity - Vertical Lift  (80 PSI lbs.)	2000
Load at Stalling Point (lbs.)	3000
Clutch	No
Automatic Brake	Yes
Overall Height	24-1/32"
Overall Width	15-11/16"
Overall Length	26-7/16"
Net Weight	312 lbs.
Air Hose	3/4" or 1"
Air Hose Inlet	3/4"
Air Connection Inlet with Remote Control	1"
Shipping Weight	364 lbs.
Dimensions - Boxed for Export	18" x 25" x 30"
Volume - Boxed for Export	7.8 cu. ft.

TEI Clamp

    TEI builds five versions of clamps and breakers. There are 4, 6 and 8-inch single clamps. Double clamp and breakers come in 6 or 8-inch opening.

    Our clamps have a very unique patented design. The clamping cylinders are on a cam mounting. This allows the cylinders to open the full width for casing, or to be turned in, creating the smallest space possible between the clamps. When installing 30 mm hollow bars it is very important to have this feature.

    Another unique feature of TEI clamps is that the breaker actually sits even with the bottom of the mast. This makes the entire drill about 8 inches shorter than with a traditional clamp and breaker set up. One more reason that TEI attachments are the best in the world.